View Our Production Schedule

Close
Menu
Register
Wish (0)
Search
Register
Wish (0)
You have no items in your shopping cart.
Menu
Search
Cart
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink
VideoThumpLink

Liger 3.0

By: PHRED instruments
Be the first to review this product
ETA: Fulfillment is currently estimated at 12 months. This guitar is currently in stock to fulfill existing pre-orders. Pre-order yours today to reserve one from the next production run.
$789.00

The PHRED instruments Liger 3.0 gets its inspiration from Doug Irwin's Tiger guitar, one of the iconic guitars played by Jerry Garcia. The Liger 3.0 is the successor to the Liger model with the Liger 3.0 featuring a 3-layer body.


Liger 3.0 offers the same kinds of upgrade options as our Liger guitar, such as: DiMarzio Super 2 and SDS-1 pickups, Schaller Locking Tuners, Brass Nut, custom brass plates, custom USA Wiring with Copper Foil shielding inside the electronics and pickup cavity, Kluson Harmonica Bridge, and a pre-amp bypass toggle switch.


The Liger 3.0 photos on this page show a Liger 3.0 with all of those upgrade options installed. Upgrade options are available to choose from below. If no upgrade options are selected, the Liger 3.0 will come with black plastic pickup mounting plate, black plastic 5-way rounded pickup toggle plate, black truss rod cover, stock wiring, stock Artec Sound pickups, stock electronics, stock gold hardware which include a standard tune-o-matic bridge, and the two output jacks will not have a mounting plate, but rather be on top of the guitar body.


Liger 3.0 is professionally setup with smooth and level frets, low action, and strung with D'Addario 10-46 strings for a smooth and clean feel all around.


Note: As of 4/22/2022, Liger 3.0 production runs will consist of a three layer Ash/Maple/Ash body.  The top and back finish and color will have a similar appearance to the Liger, but with  different wood grain than what's pictured on this page. These photos show a Liger 3.0 with zebrawood/ash/zebrawood, and zebrawood is currently in short supply.


Protect your guitar with a Hard Shell Case. Case dimensions are approximately 42"x15"x5".

G&G Quality Hard Shell Case

Re-wire the entire guitar with vintage cloth wiring, CTS pots, Orange Drop Capacitor, Switchcraft output jacks, and a CRL 5-way pickup lever switch.  In addition to upgrading your tone, you'll get smoother turning knobs and a more fluid pickup toggle selector.
USA Re-wire and Upgrade Electronics

Choose from the following options when rewiring the electronics.

Replace the stock bone nut with a brass nut to enhance the guitar's natural sustain and brightness.
Brass Nut

Replaces the stock pickups with DiMarzio or Seymour Duncan Pickups, with 4-conductor wiring, black color (other colors and covers may be requested for additional charge).
DiMarzio Super 2 Pickups

Replaces the standard stock tuning machine heads with Schaller M6, 3 per side, gold color tuning machine heads.

Schaller Gold Tuners

Choose to replace the stock pickup mounting ring, 5-way pickup toggle, output jacks, and truss rod cover with solid brass mounting plates.
Brass Mounting Plates

Shield the Guitar Pickup Cavity Route with Copper Foil Tape.

Replace the stock tune-o-matic bridge with one of the following options.
Gold Gotoh BridgeKluson Harmonica Bridge (Gold)

The stickers will be affixed to the guitar prior to shipping unless otherwise requested. Stickers are created by inlaystickers.com.
Liger stickers

Please add any additional notes in the text area below.

$789.00

+ -
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

 

Use Down Payment Code 50PercentDownPayment at checkout to make a 50% down payment on your purchase. The remaining balance will be due when your order goes into our Setup Queue.

Buy with monthly payments and get more time to pay.

Click below to learn more.

Body
The contoured body features a SHH pickup configuration mounted in a custom brass pickup plate, with discrete split coil switches and a 5-way pickup toggle. There is one master volume and 2 tone knobs, allowing you to dial in tone that goes from dark and muddy to crisp and bright.  There are two 1/4" output jacks on the top of the body.  One of them is a standard guitar output to plug in a standard guitar cable.  The other output is used for the built-in on board effects loop (OBEL), allowing you to gain further control of the sound coming from your effects pedals.  Scroll down below to read up on the benefits of having an OBEL equipped guitar.  On the back of the guitar, there is a large and accessible electronics cavity and a 9V battery box that powers the internal built-in preamp.  The built-in pre-amp boosts the signal a small amount and lowers the output resistance so that the signal is better preserved along the guitar cable to your amp. We offer a custom hard shell case to go with the Liger 3.0 guitar.

Neck
The maple core neck is set into the body with wood glue (set-neck construction).  The back of the neck contour is a C-shape that feels somewhere in between a strat and an LP neck, not too thin, and not too chunky either.  The 2-octave ebony fingerboard has 24 medium jumbo frets which are leveled and milled here at our shop in California for a nice smooth feel along the edge of the fretboard.  The fretboard features a 12 inch radius which is perfect for soloing and playing chords up and down the fretboard.  Topping off the fretboard are custom pearloid inlays which are inspired by Doug Irwin's Tiger guitar fingerboard inlays.  At the top of the neck, you'll find a brass nut for sparkly sustain, and white binding all around the fingerboard for a clean look and feel.  The tilt-back 3+3 headstock shape features colorful pearloid binding and Schaller Locking tuners.  Under the fretboard is the adjustable double-expanding truss rod, keeping the neck stable in any climate.

Products specifications
Body
Body StyleSolid Body
Body WoodAsh/Maple/Ash
Bridge StyleTune-o-matic
Stop Tailpiece StyleCustom Tailpiece
Neck
Neck WoodMaple
Fretboard WoodEbony
Frets24 Medium Jumbo
Scale Length25 1/2"
Fretboard Radius12 inch
Nut Width1 11/16"
Nut MaterialBrass
Fretboard InlaysPearloid Design
Neck BindingWhite with Black Dots
Neck StabilizationDouble-Expanding Truss Rod
Headstock
Headstock BindingColorful Pearloid
Tuning MachinesUnbranded House Brand
Pickups
Neck PickupHumbucker (4-wire)
Neck Pickup ColorBlack
Neck Pickup Toggle SwitchMini Toggle (Series/Split Coil)
Middle PickupHumbucker (4-wire)
Middle Pickup ColorBlack
Middle Pickup Toggle SwitchMini Toggle (Series/Split Coil)
Bridge PickupHumbucker (4-wire)
Bridge Pickup ColorBlack
Bridge Pickup Toggle SwitchMini Toggle (Series/Split Coil)
Control Knobs and Toggles
Volume Knob(s)Master Volume Knob
Volume Knob(s) NotesMaster volume knob is wired post-OBEL
Tone Knob(s)Multiple Tone Knobs
Tone Knob(s) Notes2 Tone Knobs
Pickup Toggle5-way Pickup Toggle
Electronics and Wiring
Pre-amp / BufferYes (Requires 9V battery)
On Board Effects Loop (OBEL)Yes
Battery BoxYes (9V Battery Included)
Electronics and Wiring NotesOBEL is wired to use external FX pre-volume knob (requires split stereo Y-cable or junction box with stereo cable)
Output
Output Jack(s)One Mono and One OBEL Output
Output Jack(s) NotesPlugging a guitar cable into the mono output powers on the pre-amp
Other Specs
Guitar StringsD'Addario EXL 110 Nickel Wound 10-46
Dimensions40.5" (h) x 13" (w) x 1.75" (d)
WeightApproximately 9-10 lbs
Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent

Guitar setup

Professional Setup and Feel

To ensure that we deliver high quality playability and tone, one of our master guitar techs in the Los Angeles area meticulously inspects your guitar from headstock to the bottom strap button, and performs a setup to make your PHRED guitar feel comfortable to play. You can look forward to smooth level frets without any sharp edges, low string action, and adjusted intonation.  If you have a specific request for your guitar setup, just let us know.  All upgrade options purchased with this guitar are installed by our techs in Los Angeles while your guitar is getting a setup.

Satisfaction Guarantee

100% Satisfaction Guarantee

Purchase a PHRED guitar with peace of mind.  We will make every effort to ensure that you are happy with your PHRED guitar when it arrives.  However, because our products are customized, all sales are final.  Our warranty outlines situations where we will honor an exchange.

Left Handed guitars by PHRED instruments

Custom Builds for Left Handed Guitar Players

We do custom builds for left handed guitar players. In the Additional Notes text area above, just type in that you would like this guitar made left-handed.  There is no additional charge for left handed Phred guitars, but expect a 4-6 month build time. 

 

Shipping Options for PHRED guitars
Shipping Methods

If you live inside the continental USA, your guitar will ship via UPS Ground. If you live in Hawaii, your guitar will likely ship UPS 3 day. If you live outside of the USA, your guitar will likely ship via the United States Post Office. You may request FedEx shipping if you prefer FedEx delivery.

 

Package Tracking

Shipping Notification via Email

All guitars ship with a tracking number which will be emailed to you at the time of shipping. You will receive one email from PHRED instruments and possibly a second or third email from the shipping company and/or the place from which you purchased if it was other than the PHRED instruments website.

 

Phred International Shipping
International Shipping and Delivery Charges

Shipping charges are calculated at checkout for international shipping. If you live outside the USA, there may be additional import charges added at the time you receive your guitar. These charges are unknown to PHRED instruments, LLC, and will not be reimbursed by PHRED instruments, LLC.

Packaging without a Case
Packaging (without a hardshell case)

PHRED instruments guitars are placed inside a foam sleeve which is placed inside a corrugated guitar box with Styrofoam support for the guitar neck and bubble wrap around the bottom, top and sides of the guitar. The guitar box is sealed with clear tape and then wrapped with a second layer of corrugated cardboard and sealed with clear tape to add stability and strength to the shipping box.

Packaging with Case
Packaging (with a hardshell case)

PHRED instruments guitars are placed inside the hardshell case, the hardshell case is placed inside a plastic sleeve, and then placed inside a shipping box with cardboard end pieces, providing a protective air gap.

Damaged Package

What to do if there is Damaged upon Delivery

While it is extremely rare, there is a plan in place just in case things go wrong with the delivery. If your shipping box arrives with damage to the box (holes, tears, cuts, etc.), please take pictures of the box and email those photos to us. If possible, please also contact UPS (1-800-PICK-UPS) immediately to report it. If the guitar arrives with damage as well, please contact us immediately to arrange for a return request. We will need to setup a damage claim request with UPS and either tell UPS to pickup the package from your location, or have you return the package back to us.

Return Guitar

Return and Refund Policy

Purchase a PHRED guitar with peace of mind.  We will make every effort to ensure that you are happy with your PHRED guitar when it arrives.  However, because our products are customized, all sales are final.  Our warranty outlines situations where we will honor an exchange.

Recently Uploaded YouTube Videos

Click on the Playlist Button in the top right of the video to see more from our YouTube Channel.

This guitar is equipped with an On Board Effects Loop (OBEL).



What does OBEL stand for?

OBEL stands for On-Board Effects Loop. It is a wiring design inside the guitar which uses a separate 1/4" stereo jack to allow the direct output from the pickups to go to effects pedals and then back into the guitar for post-effects volume control. The purpose of the OBEL is to allow for volume adjustments on the guitar after being processed by effects. You may notice that distortion and envelope filters respond differently with volume adjustments on a standard electric guitar. Using an OBEL allows for consistent response from your effects pedals/processors at any guitar volume.

Below is an example showing the PHRED instruments Wolph guitar connected to an amp and effects chain with the OBEL.

In this example, the Wolph guitar has a mono guitar cable plugged directly into the guitar amp.  The other guitar cable is a stereo 1/4" guitar cable that plugs into a Hard Truckers Junction Box (SP-1 'Y' Junction Box), other junction boxes will work as well.  At the send of the junction box, one mono guitar patch cable plugs into the input of the first effect in the pedal chain (Mutron III).  The effects chain uses standard guitar patch cables to connect each effect.  The output of the last effects pedal connects to the return of the junction box.  The OBEL bypass mini-toggle is used to either bypass or use the effects loop.

Wolph guitar with OBEL Diagram

What is required to use the OBEL?

We recommend to use a junction box with a stereo 1/4" guitar cable to connect the guitar to a junction box (a stereo Y-cable can be used instead). A junction box looks like an effects pedal.  It has a 1/4" stereo input jack on one side, which is where the stereo guitar cable from the guitar's OBEL jack plugs into.  The other side of the junction box has 2 mono 1/4" jacks.  One of those jacks is a send to the input of your effects the other is a return from the output of your effects.  Using one mono guitar fx patch cable, connect the send from the junction box into the input of your first effect pedal, and the the return from the junction box plugs into the output of your last effects pedal in the chain.

Can an OBEL equipped guitar be plugged in like a standard electric guitar with one cable using just the mono guitar output?

Yes, you do not have to use the OBEL in order to plug in your guitar to your effects.  You can simply bypass the OBEL using the OBEL bypass mini-toggle switch on the guitar and use the guitar as a standard electric guitar with your effect pedals plugged in-line between your guitar and amp.

Where can I get a junction box?

PHRED instruments recommends The HubBub junction box by Godfrey Daniels Guitar Works which has more functionality designed for guitar players who play guitars with standard mono guitar outputs and also with OBEL equipped guitars. Click here to view Junction Boxes in our OBEL Accessories section.

Where can I find a stereo guitar cable?

We recommend the Dual TRS/TS Cable by Godfrey Daniels Guitar Works. Click here to view Cables in our OBEL Accessories section.

How long does it take for a production run to be completed?

Usually it takes anywhere from 4-6 months for a production run to be complete.  What determines that time frame is usually the total amount of guitars in the production run, time to source materials, hardware and electronics, and unexpected delays. The time is takes to complete a production run is not the same as the time it will take to fulfill your pre-order.  Contact us to learn more about our production schedule and pre-order fulfillment times.

Reserve your guitar from the next batch by pre-ordering today!

By pre-ordering this guitar, your pre-order is placed into our queue system explained below.  When your guitar arrives in stock, we will setup and install any options you selected, and then we'll ship out your guitar.  Pre-orders are processed in the order in which they were received.

Understanding our queue system

Pre-Order Queue

When your order is in the pre-order queue, it means that your guitar is currently in production or waiting to begin production.

In Stock

When your order is in stock, it means that your guitar is in stock at our shop, and is waiting to be queued up for a setup.

Getting Setup

When your order is in the getting setup queue, it means that we are working on setting up your guitar and installing any add-on upgrades.

Shipping Queue

When your order is in the shipping queue, it means that your guitar is waiting to be boxed up and shipped out. Guitars are typically boxed up and shipped out on Monday or Friday and tracking information will be emailed to you when your guitar ships out.
*
*
*
*
Product tags
Customers who bought this item also bought
HubBub Stage Pro

HubBub Stage Pro

Built in a larger box, The StagePro has inputs for an Obel equipped guitar (labeled OBEL and GUITAR) and for a traditionally wired Auxiliary instrument (labeled AUX) as well as the jacks for effects SEND and RETURN and AMP. Instead of a toggle switch, The StagePro has a foot swtich with LED indicator lights to switch between the 2 modes. The StagePro utilizes a unique True Bypass switching configuration that totally disengages the instrument not in use from the signal chain. You can now switch between your OBEL equipped guitar AND a traditional input auxiliary instrument (pedal steel, mandolin, violin, keyboard, guitar etc) with just the stomp of a switch. The HubBub StagePro accommodates both Obel guitar and Auxiliary instrument AT THE SAME TIME. Please note: Like the original HubBub, the StagePro functionality is totally passive and will work perfectly without any power. The Hub Bub Stage Pro is made by Godfrey Daniels Guitar Works.

$134.00
Dual TRS/TS OBEL Cable

Dual TRS/TS OBEL Cable

The Dual TRS/TS Cable consists of 2x 12′ Mogami Black Cables (1 TRS stereo & 1 TS mono) both with one straight and one rt angle Black Neutrix Plug (most popular configuration). Bundled in a FlexoPet expandable sleeve and secured with Double Layered Adhesive Lined Shrink Wrap for easy cable management and neat appearance. The Dual TRS/TS OBEL Cable is made by Godfrey Daniels Guitar Works.

$157.00
Phred Instruments Upgrade Options

All Upgrade Options

This is a list of all the upgrade options for all guitars. Please find the upgrades you would like to add to your guitar that is currently in the order queue. If you would like to change your shipping address, please contact us for that request. If you do not have a guitar in the order queue at this time, please do not use this page to purchase individual items. Thank you.
$0.00
HubBub

HubBub

“The HubBub” – The world’s first Dual Mode Cable Hub exclusively designed for OBEL equipped guitars. Built in a standard MXR style single aluminum box, The HubBub is hand wired using Switchcraft jacks. Just flip the toggle switch to the right, and the HubBub routes the signal from your OBEL equipped guitar thru your pedals, back to your guitar volume/tone controls and out to your amp. Flip the toggle to the left, and the The HubBub bypasses the OBEL circuit and routes a traditional signal from the guitar thru your effects and out to your amp. The HubBub is a passive system so no battery or power supply is necessary. The Hub Bub is made by Godfrey Daniels Guitar Works.

$108.00
Related products
HubBub

HubBub

“The HubBub” – The world’s first Dual Mode Cable Hub exclusively designed for OBEL equipped guitars. Built in a standard MXR style single aluminum box, The HubBub is hand wired using Switchcraft jacks. Just flip the toggle switch to the right, and the HubBub routes the signal from your OBEL equipped guitar thru your pedals, back to your guitar volume/tone controls and out to your amp. Flip the toggle to the left, and the The HubBub bypasses the OBEL circuit and routes a traditional signal from the guitar thru your effects and out to your amp. The HubBub is a passive system so no battery or power supply is necessary. The Hub Bub is made by Godfrey Daniels Guitar Works.

$108.00
HubBub Stage Pro

HubBub Stage Pro

Built in a larger box, The StagePro has inputs for an Obel equipped guitar (labeled OBEL and GUITAR) and for a traditionally wired Auxiliary instrument (labeled AUX) as well as the jacks for effects SEND and RETURN and AMP. Instead of a toggle switch, The StagePro has a foot swtich with LED indicator lights to switch between the 2 modes. The StagePro utilizes a unique True Bypass switching configuration that totally disengages the instrument not in use from the signal chain. You can now switch between your OBEL equipped guitar AND a traditional input auxiliary instrument (pedal steel, mandolin, violin, keyboard, guitar etc) with just the stomp of a switch. The HubBub StagePro accommodates both Obel guitar and Auxiliary instrument AT THE SAME TIME. Please note: Like the original HubBub, the StagePro functionality is totally passive and will work perfectly without any power. The Hub Bub Stage Pro is made by Godfrey Daniels Guitar Works.

$134.00
Jerry Garcia Replica Guitar Strap

Jerry Garcia Replica Guitar Strap

From Jeri Designs website: For our Jerry Garcia replica guitar strap we start with a super thick piece of heavy duty leather. Jerry had two versions of this strap, and the leather and style we use is like the first of this version strap that he started wearing in 1973. The strap is cut to 2.75" wide, with a thinner strap in the front for adjustment. We've attached the buckle with a strip of leather and Chicago Screws for a secure hold and, and oxidized the buckle so it looks like Jerry's did.

$139.00
Related Spotlight Posts
Artist Spotlight: Connor Kennedy -Tuesday, November 24, 2020

Connor Kennedy, guitarist from Woodstock, and a member of Steely Dan’s touring band.

Comments (0) details
Artist Spotlight: Pappy: theCAUSE, Reuben’s Painted Mandolin -Tuesday, September 10, 2024
About 2 years ago, I was sponsored by PHRED Instruments and presented with a Liger 1.0 with stock electronics. When I first plugged it in I felt the tingle. It was the closest “Jerry sound” I’d achieved. I’ve been adding to that sound over the past 2 years, adding a brass nut, the brass plate, upgraded harmonica bridge, upgraded jacks and have now replaced the stock pickups with DiMarzios (Super 2s on neck and middle and Super Distortion on the bridge). Freddy Rose has been extremely ‘instrumental’ in helping me get parts. His customer service has been nothing short of amazing. I can’t recommend PHRED enough for those, like me, that want that Jerry tone and can’t afford to drop 5 figures on the true, handmade exotic wood replicas. This guitar has been a lot of fun to play with my bands, theCAUSE (mostly GD covers) and Reuben’s Painted Mandolin (JGB Tribute). As Freddy told me the stock pickups get you in the ballpark and the DiMarzios put you on the field. If you’re looking for the Jerry tone at an affordable price, PHRED is where it’s at.
Comments (0) details
Contact
  • PHRED instruments, LLC
    5627 Kanan Road #295
    Agoura Hills, CA 91301
    USA
  • phred@phredinstruments.com
  • 424.245.5713 | Text
  • 424.245.5713 | Voice
Information
Newsletter
Copyright © 2024 PHRED instruments, LLC. All rights reserved.