Dual Humbucker

The PHRED instruments DC39 guitar gets its inspiration from the traditional double cut-away semi-hollow body, which features a dual humbucker setup, with discrete volume and tone knobs per pickup and a 3-way pickup toggle. Our DC39 guitar is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around.

The PHRED instruments DC39 guitar gets its inspiration from the traditional double cut-away semi-hollow body, which features a dual humbucker setup, with discrete volume and tone knobs per pickup and a 3-way pickup toggle. Our DC39 guitar is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around.

The PHRED instruments DockStar Koa gets its inspiration from Trey Anastasio's Languedoc guitar. The fully hollow body features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! Our DockStar Koa is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around.

The PHRED instruments DockStar K2 gets its inspiration from Trey Anastasio's Languedoc guitar. The fully hollow body features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! Our DockStar K2 is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around.

The DockStar K2 features Taiwan Koa (Formosan Koa, Acacia Confusa) wood veneers on the top and back of the body.  Taiwan Koa is a cousin of Hawaiian Koa (Acacia Koa), and has a slightly darker and heavier sound than Hawaiian Koa.  As a wood veneer, however, Taiwan Koa's contribution to the DockStar K2 is more visual than as a tone wood.

More photos will be added soon from the 2022 production runs.

The PHRED instruments DockStar Koa gets its inspiration from Trey Anastasio's Languedoc guitar. The fully hollow body features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! Our DockStar Koa is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around. 

The PHRED instruments Micro DeadBolt gets its inspiration from Steve Cripe's Lightning Bolt, one of the iconic guitars played by Jerry Garcia in the 1990s. The body features a dual humbucker setup mounted in a custom pickup plate, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! Micro DeadBolt is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around. The NEW Micro DeadBolt has a 25.5" scale length and comes with 10-46 gauge D'Addario strings.  Photos will be updated soon.  The body size, electronics and hardware are the same as in the photo.  The neck is a 25.5" scale neck and the headstock shape is the same.

The PHRED instruments Tella gets its inspiration from an iconic guitar design from the 1950s, the Fender Telecaster. The body features a dual humbucker pickup setup with a custom rectangular pickup mounting plate, along with a 3-way pickup selector for various tone combinations! Our Tella guitar features a full 2-octave fingerboard (24 frets) and a set-neck design for improved sustain. Tella is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around. DJ Williams plays a Tella guitar with the following upgrades added: Seymour Duncan '59 pickups, USA Electronics and Rewiring, Schaller Tuners, and a Gotoh Bridge. Choose from the upgrade options below to customize your Tella today!

The Phred Instruments R2 is a small body archtop guitar Hand Made in California: carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow. No details were spared in the making of R2.

Features a hand carved flame maple top, back, and padauk sides.

Additional features include a high gloss nitrocellulose lacquer finish, 24 frets, 25.5” scale length, 14" radius, 1 11/16" nut width.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

R2 is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

The first production run will begin around July/August 2021.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an R2 pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments R2 is a small body archtop guitar Hand Made in California: carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow. No details were spared in the making of R2.

Features a hand carved flame maple top, padauk back, and padauk sides.

Additional features include a high gloss nitrocellulose lacquer finish, 24 frets, 25.5” scale length, 14" radius, 1 11/16" nut width.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

R2 is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an R2 pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments R2 is a small body archtop guitar Hand Made in California: carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow. No details were spared in the making of R2.

Featuring a hand carved koa top, back, and sides.

The body, f-holes, neck and headstock are bound.

Additional features include a high gloss nitrocellulose lacquer finish, 24 frets, 25.5” scale length, 14" radius, 1 11/16" nut width.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

R2 is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an R2 pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments R2 is a small body archtop guitar Hand Made in California: carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow. No details were spared in the making of R2.

Featuring a hand carved figured claro walnut top, back, and side.

Neck: Curly eastern maple with padauk center lamination.

Adironadack spruce top braces.

The body, f-holes, neck and headstock are bound.

Additional features include a high gloss nitrocellulose lacquer finish, 24 frets, 25.5” scale length, 14" radius, 1 11/16" nut width.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

R2 is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an R2 pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments Reprise is a small body archtop guitar: hand built, carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow.

Featuring a hand carved flame maple top, spruce back, and mahogany sides, the body is bound in mahogany on the top, back, and sides.

The flame maple neck with an ebony fingerboard is also bound by mahogany, and the mahogany binding goes all the way around the headstock.

Additional features include a nitro glossy finish, 24 frets, 25.5” scale length, and a arch top style neck joint.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

Our small team of expert luthiers overseas build jazz arch top guitars and every detail of Reprise is drawn from that tradition.

Reprise is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an Reprise pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments Reprise is a small body archtop guitar: hand built, carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow.

Featuring a hand carved flame maple top, spruce back, and mahogany sides, the body is bound in mahogany on the top, back, and sides.

The flame maple neck with an ebony fingerboard is also bound by mahogany, and the mahogany binding goes all the way around the headstock.

Additional features include a nitro glossy finish, 24 frets, 25.5” scale length, and a arch top style neck joint.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

Our small team of expert luthiers overseas build jazz arch top guitars and every detail of Reprise is drawn from that tradition.

Reprise is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well.

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an Reprise pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The Phred Instruments Reprise Koa is a small body archtop guitar: hand built, carved top and back, sides moulded and shaped to form, all solid woods, parallel bracing, kerfing, and fully hollow.

Featuring a hand carved koa top, koa back, and mahogany sides, the body is bound in maple on the top, back, and sides.

The flame maple neck with an ebony fingerboard is also bound by maple, and the maple binding goes all the way around the headstock.

Additional features include a nitro glossy finish, 24 frets, 25.5” scale length, and a arch top style neck joint.

Electronics include a dual humbucker setup with Seymour Duncan '59 pickups, discrete humbucker/split coil/parallel switches per pickup, and a 3-way pickup toggle. One main volume, and one tone control.

Our small team of expert luthiers overseas build jazz arch top guitars and every detail of Reprise Koa is drawn from that tradition.

Reprise Koa is professionally setup in California with low action and D'Addario 10-46 strings. The frets are leveled, dressed and milled for a nice smooth and clean feel all around. Hardware and Electronics are installed in California as well. 

Note: Reprise Koa photos represent one particular Reprise Koa from the production run. 

Use Coupon Code 50PercentDown at checkout to make a 50% down payment on an Reprise pre-order. The remaining balance will be due when your order goes into our Setup Queue.

The PHRED instruments Ace guitar is a neck through double cut-away guitar that gets its inspiration from Bob Weir's Cowboy Fancy guitar. The body features a humbucker-single-humbucker setup, with discrete split coil switches and discrete on-off toggles for each pickup. Our Ace guitar is professionally setup with low action and D'Addario 10-46 strings, and the frets are leveled and milled here at our shop in California for a nice smooth and clean feel all around.