DockStar Koa 2

Body
The fully hollow body with koa veneers on the front and back features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! There is one master volume and one master tone knob for dialing in your tone.  The guitar strings pass over a floating bridge that is not anchored to the guitar body. Similar to a violin, banjo or mandolin bridge, the bridge simply rests on top of the body and is held in place by string tension.  The ebony tailpiece is attached to the end of the guitar, holding the strings in place.  There is one 1/4" standard guitar output jack on the side of the guitar body.  We offer an optional custom hard shell case to go with the DockStar K2 guitar.

Neck
The maple core neck is attached to the body using very strong wood glue.  The back of the neck contour is a C-shape that feels somewhere in between a strat and an LP neck, not too thin, and not too chunky either.  The 2-octave ebony fingerboard has 24 medium jumbo frets which are leveled and milled here at our shop in California for a nice smooth feel along the edge of the fretboard and all around.  The fretboard features a 15 inch radius which is perfect for soloing and playing chords up and down the fretboard.  Topping off the fretboard are custom pearloid inlays designed by PHRED instruments.  At the top of the neck, you'll find a bone nut for good sustain, and white binding all around the fingerboard for a clean look and feel.  The tilt-back 6-inline headstock shape is a PHRED instruments trademark design.  Under the fretboard is the adjustable double-expanding truss rod, keeping the neck stable in any climate.