All Upgrade Options

Protect your guitar with a Hard Shell Case. Case dimensions are approximately 42"x15"x5".

Choose to replace the stock pickup mounting ring, 5-way pickup toggle, output jacks, and truss rod cover with solid brass mounting plates.

Replace the stock chrome knobs with our "Hi-Phi" Aluminum knobs, inspired by, and extremely similar to, the the knobs on Jerry Garcia's Wolf guitar by Doug Irwin.

Replace the stock tune-o-matic bridge with one of the following options.

Replace the stock tune-o-matic bridge with one of the following options.

Replace the stock tune-o-matic bridge with one of the following options.

Brass saddles brighten the tone and improve sustain compared to bone saddles. Bone saddles available upon request at no additional charge.

Replace the Stock Pickups with the following Seymour Duncan pickups. Four-conductor wiring and no logo on the pickups.

'59 Pickups (SH-1)	Stag Mag Pickups (SH-3)

Replaces the stock pickups with DiMarzio Pickups, with two 4-conductor wiring humbuckers, and one single coil (other colors and covers may be requested for additional charge).

Replaces the stock middle and bridge pickups with DiMarzio Super 2 pickups, model DP104 with Four-conductor wiring, black color (other colors and covers may be requested for additional charge). Replaces the neck pickups with DiMarzio SDS-1 pickup, model DP111, white color (cream or black color pickup cover also available upon request).

Shield the Guitar Pickup Cavity Route with Copper Foil Tape.

Replaces the stock pickups with DiMarzio or Seymour Duncan Pickups, with 4-conductor wiring, black color (other colors and covers may be requested for additional charge).

Shield the Guitar Pickup Cavity Route with Copper Foil Tape.

Replaces the stock pickups with EMA SA Active Pickups loaded with Alnico V bar Magnets.

Re-wire the entire guitar with vintage cloth wiring, CTS pots, Orange Drop Capacitor, Switchcraft output jacks, and a CRL 5-way pickup lever switch.  In addition to upgrading your tone, you'll get smoother turning knobs and a more fluid pickup toggle selector.

Choose from the following options when rewiring the electronics.

Re-wire the entire guitar with CTS pots, Orange Drop Capacitor, Switchcraft output jack(s), and a Switchcraft 3-way pickup selector switch.  In addition to upgrading your tone, you'll get smoother turning knobs and a more fluid pickup toggle selector. Chose the Shielded Wiring option to further assist with keeping out unwanted EMI noise from the guitar signal.

Wire the entire guitar with CTS or Bourne pots, Orange Drop Capacitor, Switchcraft output jack(s), Upgraded Mini Toggles, and Cloth Covered Wires. 

Choose from the following options when rewiring the electronics.

Replace the stock bone nut with a brass nut to enhance the guitar's natural sustain and brightness.

Replaces the standard stock tuning machine heads with Schaller M6, 3 per side, chrome tuning machine heads.

Replaces the standard stock tuning machine heads with Schaller M6, 3 per side, gold color tuning machine heads.

Upgrade the stock tuners with the following 6-inline tuning machine heads.

Replaces the standard stock tuning machine heads with Schaller M6, 3 per side, black tuning machine heads.

Add a MIDI and/or Piezo pickup to your guitar to interface with MIDI sound modules. Requires a Roland 13-pin DIN cable and compatible 13-pin DIN cable interface for guitar. Do not choose the Kluson Harmonica Bridge option with a MIDI and/or Piezo pickup option.

This sticker will be affixed to the guitar prior to shipping unless otherwise requested. Stickers are created by inlaystickers.com.

The stickers will be affixed to the guitar prior to shipping unless otherwise requested. Stickers are created by inlaystickers.com.

The stickers will be affixed to the guitar prior to shipping unless otherwise requested. Stickers are created by inlaystickers.com.

Please add any additional notes in the text area below.

Please type in the name of the guitar for which you are purchasing these upgrades.